These brass hose menders are made for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose c...

1/4" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

5/16" brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desir...

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may...

1/4" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished...

1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/4" MNPT brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. Hose ID measures 5/16". A hose clamp may also be...

Full flow bendable water nozzle has a 3/4" female garden hose thread. Bend the water nozzle for water to flow, release nozzle and water flow stops....

1/4" FNPT crosses may be used to split lines or add additional outlets. Brass crosses provides four connections with one part. Great for shops that...

3/8" FNPT brass crosses may be used to split lines or add additional outlets. Provides four connections with one part which makes these great for s...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not a...

This 3/8" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose f...

3/8" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" NPT zamak alloy hose ends fit a 1/4" ID hose. Zamak hose ends and menders may be used in place of brass or stainless steel. Hose end includes...

1/4" MNPT zamak alloy hose ends fit a 1/4" ID hose. Zamak hose ends and menders may be used in place of brass or stainless steel. Hose end include...

Milton ® (S-659) 1/4" NPT Full-Swivel Air Hose End Fitting (Female) 1/4" FNPT swivel hose ends help eliminate kinked and twisted airlines. Offers a...

3/8" FNPT brass crosses may be used to split lines or add additional outlets. Provides four connections with one part which makes these great for s...