1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may...

1/4" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished...

1/4" MNPT with a 1/4" barb swivel are made with steel construction and have a black oxide finish. Full 360 degree swivel hose ends help eliminate k...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter (Box of 50) 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old f...

3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter (Box of 5) 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fi...

3/4" MNPT x 1/2" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/4" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/4" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Milton® 1/2" MNPT x 1/4" FNPT Hose Reducer Bushing (Box of 50) 1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or repla...

1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

These brass hose menders fit a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may ...

3/8" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

1/4" MNPT reusable hose end fittings can be used again and again. Has a maximum air pressure of 250 PSI. Fits hoses with an 11/16" hose OD or 3/8" ...

1/4" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is...