All

Milton ® (S-659) 1/4" NPT Full-Swivel Air Hose End Fitting (Female) 1/4" FNPT swivel hose ends help eliminate kinked and twisted airlines. Offers a...

3/8" FNPT brass crosses may be used to split lines or add additional outlets. Provides four connections with one part which makes these great for s...

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

1/4" FNPT crosses may be used to split lines or add additional outlets. Brass crosses provides four connections with one part. Great for shops that...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter (Pack of 10) 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old ...

3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting (Pack of 10) These 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new...

1/4" MNPT hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses. 1/4" Male NPT x 1/4" NPS ball ...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" NPS x 1/4" NPS male hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses.

Two pack of 3/8" FNPT hex coupling fittings are used to assemble new hoses or replace old fittings on hoses.

Two pack of 3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

Two pack of 1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

Pack of two brass hose menders for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clam...

1/4" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

Pack of two 5/16" brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is ...

Two pack of 1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used ...

1/4" Air hose repair kit provides everything required to repair a hose in the field. Kit contains 1 hose end, 1 hose mender, 3 hose clamps and 1 ai...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

This 3/8" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose f...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...