Industrial Auto-Retractable Hose Reel - 300 Max PSI Made with heavy duty steel, the Industrial Auto-Retractable Hose Reel is built to last with its...

3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

1/4" NPT Full-Swivel Air Hose End Fitting (Female) 1/4" FNPT swivel hose ends help eliminate kinked and twisted airlines. Offers a full 360-degree ...

Designed specifically for Milton® push on and lock on hoses, these 1/4" MNPT brass hose ends fit a 3/8" hose ID. These hose ends require no clamps ...

1/4" Male hose end with 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be...

3/8" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new hoses or replace...

1/4" NPT Reusable hose end fittings can be used again and again. Has a 5/8" Hose OD and 1/4" Hose ID. Can be used with both 1/4" inner diameter (5/...

1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/4" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on...

1/4" MNPT reusable hose end fittings can be used again and again. Has a Maximum air pressure of 250 PSI. Fits hoses with a 3/4" Hose OD or 3/8" hos...

1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" MNPT hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses. 1/4" Male NPT x 1/4" NPS ball ...

3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

This 3/8" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose fi...

Milton® 1/2" MNPT 1/2" ID Hose End Fitting 1/2" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to assemble new h...

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...