This hose whip is free-flowing and cannot be used without the Bayonet Inflator Gauge- Air is turned on/off by the bayonet controller. If connected directly to an air source, air will constantly flow out.
The “S” means the product is in a displayable package for retail purposes. The product is the same with or without the “S” prefix.
Many of the Milton® products are in displayable packaging for retail purposes. For convenience some items are packed 2 per card or “2/cd.”
This hose whip is free-flowing and cannot be used without the Bayonet Inflator Gauge- Air is turned on/off by the bayonet controller. If connected directly to an air source, air will constantly flow out.
This hose whip is free-flowing and cannot be used without the Bayonet Inflator Gauge- Air is turned on/off by the bayonet controller. If connected directly to an air source, air will constantly flow out.
The model and style depends on the size and volume of the air compressor. Please refer to the FRL application chart in the FRL section of the Milton® catalog on page 34.
The model and style depends on the size and volume of the air compressor. Please refer to the FRL application chart in the FRL section of the Milton® catalog on page 34.
This is a relieving port that allows the regulator to be used on dead-ended applications Normally, you will neither feel nor hear air coming from this hole. If you do, the regulator diaphragm has a leak, or the needle valve under the cap is dirty, or the regulator is installed backwards.
10 W motor oil or proprietary air tool oil. Never expose poly bowls to synthetic oils, phosphate esters or chlorinated hydrocarbons as they may cause the bowl to crack.
For general purpose applications, the recommended oil flow range is: 1/4” Pipe: 1–3 drops per minute 3/8” Pipe: 2–6 drops per minute 1/2” Pipe: 3–9 drops per minute.
When you spend $75+
Offering a range of policies
Contact our support team today
Locate the closest inventory