3/4" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

These brass hose menders fit a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may ...

1/4" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

1/4" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is...

This 3/8" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose f...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

Milton® 1/2" MNPT 1/2" ID Hose End Fitting (Box of 100) 1/2" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to ass...

1/4" MNPT brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. Hose ID measures 5/16". A hose clamp may also be...

1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/4" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

Milton® 1/2" MNPT 3/8" OD Push-to-Connect Meter Out Flow Control (Box of 5) These 1/2" MNPT meter out push to connect fitting with flow control off...

3/8" MNPT meter out push to connect fitting with flow control offers easy installation of air lines. Simply push tubing into fitting, no gluing or ...

1/4" MNPT meter out push to connect fitting with flow control offers easy installation of air lines. Simply push tubing into fitting, no gluing or ...

1/8" MNPT meter out push to connect fitting with flow control offers easy installation of air lines. Simply push tubing into fitting, no gluing or ...

1/4" MNPT meter out push to connect fitting with flow control offers easy installation of air lines. Simply push tubing into fitting, no gluing or ...

3/8" MNPT meter in push to connect fitting with flow control offers easy installation of air lines. Simply push tubing into fitting, no gluing or s...

Milton® 1/2" MNPT 3/8" OD Push-to-Connect Meter In Flow Control (Box of 5) 1/2" MNPT meter in push to connect fitting with flow control offers easy...