Full-Priced Items

Designed specifically for Milton ® push on and lock on hoses, these 3/8" MNPT brass hose ends fit a 1/2" hose ID. These hose ends require no clamps...

Designed specifically for Milton ® push on and lock on hoses, these 1/4" MNPT brass hose ends fit a 3/8" hose ID. These hose ends require no clamps...

This 3/8" ID MNPT swivel hose end is a replacement part for Milton ® nylon ReKoil hoses.

This 25 foot nylon re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

This 30 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 3/8" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 30 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 100 foot nylon re-koil hose is perfect for connecting to overhead air lines to keep the hose off the floor and resists abrasion. Maximum worki...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 9/16" OD and a 0.562 ID. Note that rubber hose tolerances vary...

This 500 foot deluxe heavy duty EPDM rubber hose is designed for tough service station and shop applications. This 2 braid hose is kink resistant a...

Made of strong, flexible Nitrile with synthetic yarn reinforcement, Milton® push on and lock on air hoses resist oil, abrasions and ozone effects....

This 50 foot nylon re-koil hose is assembled with re-usable, full flow 3/8" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

1/4" MNPT x 1/4" barb swivel hose ends have a full 360 degree swivel to help eliminate kinked and twisted air lines. Made of steel with a black oxi...

1/4" FNPT crosses may be used to split lines or add additional outlets. Brass crosses provides four connections with one part. Great for shops that...

3/8" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

5/16" brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desir...

Reusable hose end fittings can be used again and again and are an easy way to repair air hoses. These hose ends can be used with a 1/4" ID or 5/8" OD.

These 1/4" NPS brass female swivel hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is ...

EXELAIR® by Milton®’s Simply Better Air® system provides the best solution to manage compressed air. This (EX55L-08M) 1" NPT High Flow Air Lubricat...