Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting (Single Retail Pack) These 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to asse...

3/8" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" MNPT hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses. 1/4" Male NPT x 1/4" NPS ball ...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

3/8" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

Milton® 1/2" MNPT 1/2" ID Swivel Hose End Fitting (Box of 5) This 1/2" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose ...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Bras...

1/8" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/8" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

Milton® 1/2" ID Hose Mender Fitting (Box of 5) These 1/2" hose ID brass hose menders are used to assemble new hoses or replace old fittings on hose...

1/4" MNPT brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. Hose ID measures 5/16". A hose clamp may also be...

Milton® 1/2" MNPT 1/2" ID Hose End Fitting 1/2" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to assemble new h...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finishe...

Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not a...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

Pack of two brass hose menders for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clam...