Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting (Pack of 10) These 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new...

Reusable hose end fittings can be used again and again and are an easy way to repair air hoses. These hose ends can be used with a 1/4" ID, 9/16" O...

This reusable brass hose mender can be used again and again. Has a Maximum air pressure of 250 PSI. Fits hoses with a 3/4" OD or 3/8" ID.

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished...

Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not a...

Two pack of 3/8" FNPT hex coupling fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

Milton® (#614-4) 1/4" NPT Brass Compressor Tank Drain Cock   This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on compr...

1/4" NPT Reusable hose end fittings can be used again and again. Has a 5/8" Hose OD and 1/4" Hose ID. Can be used with both 1/4" inner diameter (5/...

1/4" NPS x 1/4" NPS male hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses.

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/4" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Milton® 1/2" MNPT x 1/4" FNPT Hose Reducer Bushing (Box of 50) 1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or repla...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished...

Reusable hose end fittings can be used again and again and are an easy way to repair air hoses. These hose ends can be used with a 1/4" ID or 5/8" OD.

1/4" MNPT hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses. 1/4" Male NPT x 1/4" NPS ball ...

1/4" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

Milton® (1094-8) 1/2” FNPT Full Port Heavy-Duty Brass Ball Valve Milton®’s full port high capacity ball valves are designed to be used with compres...

1/4" Female swivel hose end for 1/4" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may...