1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Bras...

1/8" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

Milton® 1/2" MNPT 1/2" ID Hose End Fitting 1/2" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to assemble new h...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

Milton® 1/2" MNPT x 1/4" FNPT Hose Reducer Bushing (Box of 50) 1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or repla...

1/8" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

Milton® 1/2" ID Hose Mender Fitting (Box of 5) These 1/2" hose ID brass hose menders are used to assemble new hoses or replace old fittings on hose...

1/4" MNPT brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. Hose ID measures 5/16". A hose clamp may also be...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finishe...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not a...

Milton® (#614-4) 1/4" NPT Brass Compressor Tank Drain Cock   This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on compr...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

Pack of two brass hose menders for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clam...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

Reusable hose end fittings can be used again and again and are an easy way to repair air hoses. These hose ends can be used with a 1/4" ID, 9/16" O...