1/4" Air hose swivel connector with flow control. 360 degree swivel in two directions allows air hose to be connected to air tool helps reduce hose...

3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

1/4" NPT Full-Swivel Air Hose End Fitting (Female) 1/4" FNPT swivel hose ends help eliminate kinked and twisted airlines. Offers a full 360-degree ...

1/4" Male hose end with 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be...

3/8" MNPT reusable hose end fittings can be used again and again. Has a maximum air pressure of 250 PSI. Fits hoses with 3/4" hose OD or 3/8" hose ID.

3/8" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" Air Hose Swivel Connector with flow control gage. The 360 degree swivel moves in two directions which allows air hose to be connected to air t...

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new hoses or replace...

3/8" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

1/4" MNPT reusable hose end fittings can be used again and again. Has a maximum air pressure of 250 PSI. Fits hoses with an 11/16" hose OD or 3/8" ...

1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/4" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desira...

1/4" NPT Reusable hose end fittings can be used again and again. Has a 5/8" Hose OD and 1/4" Hose ID. Can be used with both 1/4" inner diameter (5/...

Milton® 1/2" MNPT Hex Nipple Hose Fitting (Box of 5) These 1/2" x 1/2" MNPT brass hex nipples are used to assemble new hoses or replace old fitting...

Milton® 1/2" MNPT 1/2" ID Swivel Hose End Fitting (Box of 5) This 1/2" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose ...

Milton® (#614-4) 1/4" NPT Brass Compressor Tank Drain Cock   This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on compr...

1/4" MNPT reusable hose end fittings can be used again and again. Has a Maximum air pressure of 250 PSI. Fits hoses with a 3/4" Hose OD or 3/8" hos...

1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on...

These 3/8" MNPT x 1/2" MNPT brass hex nipples are used to assemble new hoses or replace old fittings on hoses.

3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

1/4" MNPT hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses. 1/4" Male NPT x 1/4" NPS ball ...

1/4" MNPT reusable hose end fittings can be used again and again. These hose ends can be used with a 1/2" hose OD or a 1/4" hose ID. Has a Maximum ...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...