Hose Reels & Fittings

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

Pack of two brass hose menders for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clam...

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Bras...

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

Milton® 1/2" MNPT x 3/8" FNPT Reducer Bushing Hose Fitting (Pack of 10) These 1/2" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new...

Milton® 1/2" MNPT x 1/4" FNPT Hose Reducer Bushing (Box of 50) 1/2" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or repla...

Milton® 1/2" ID Hose Mender Fitting (Box of 5) These 1/2" hose ID brass hose menders are used to assemble new hoses or replace old fittings on hose...

1/8" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/8" MNPT brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

Milton® 1/2" MNPT 3/8" OD Push-to-Connect Tube Fitting (Box of 10) These 1/2" MNPT nylon push to connect straight tube fittings offer easy installa...

Designed specifically for Milton ® push on and lock on hoses, these 1/4" FNPT brass hose ends fit a 1/4" hose ID. These hose ends require no clamps...

Milton® 1/2" MNPT 1/2" ID Push-on and Lock Fitting (Box of 10) Designed specifically for Milton ® push on and lock on hoses, these 1/2" MNPT brass ...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

Milton® (#614-4) 1/4" NPT Brass Compressor Tank Drain Cock   This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on compr...

1/4" NPT Reusable hose end fittings can be used again and again. Has a 5/8" Hose OD and 1/4" Hose ID. Can be used with both 1/4" inner diameter (5/...

1/4" NPS x 1/4" NPS male hex nipples are brass hose fittings that are used to assemble new hoses or replace old fittings on hoses.

Two pack of 3/8" FNPT hex coupling fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not a...