1/4" MNPT with a 1/4" barb swivel are made with steel construction and have a black oxide finish. Full 360 degree swivel hose ends help eliminate k...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter (Box of 50) 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old f...

3/4" MNPT x 1/2" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/4" MNPT x 3/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" MNPT brass hex nipple fittings are used to assemble new hoses or replace old fittings on hoses.

These brass hose menders fit a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may ...

1/4" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

This 3/8" MNPT 360 degree full swivel hose fitting prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose f...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

Milton® 1/2" MNPT 1/2" ID Hose End Fitting (Box of 100) 1/2" MNPT brass hose ends have a 1/2" ID hose and barb. Brass hose fittings are used to ass...

1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirabl...

1/4" MNPT x 1/4" barb swivel hose ends have a full 360 degree swivel to help eliminate kinked and twisted air lines. Made of steel with a black oxi...

1/4" FNPT crosses may be used to split lines or add additional outlets. Brass crosses provides four connections with one part. Great for shops that...

3/8" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

5/16" brass hose mender fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desir...

Reusable hose end fittings can be used again and again and are an easy way to repair air hoses. These hose ends can be used with a 1/4" ID or 5/8" OD.