The Brake Releaser® - Safe & Easy Way to Release Frozen Air Brake Lines The Milton® Brake Releaser® is designed to dissolve Ice crystals in th...

2" Tubeless tire valves are the snap in type with a cap thread size of .305-32. Standard rubber replacement valve fits rim hole diameter 0.453". Ma...

2 5/32" tubeless tire valves are the straight, clamp in type for 5/8" side hole mounting on demountable or non-demountable rims. TR #500 tubeless t...

This 1/4" MNPT safety relief valve is constructed with the same materials as ASME safety valves, but is not national board certified so they cannot...

T style adjustable pocket blow gun has an easy grip, two finger control to adjust from full volume air flow to complete shut off. Knurled grip for ...

Milton® 1/2" MNPT Hex Nipple Hose Fitting (Box of 5) These 1/2" x 1/2" MNPT brass hex nipples are used to assemble new hoses or replace old fitting...

This 1/4" FNPT handy bend water nozzle conveniently controls water flow. Simply bend the nozzle for water flow, release nozzle and the water stops....

Milton®  S-574A Pro Analog Pistol Grip Inflator Gauge - Straight Chuck and 15" Hose - 160 PSI No need to worry about batteries with this analog inf...

Milton ® (S-219) 1/4" FNPT M-Style ® Safety Coupler and Plug Kit - 5 Piece Milton ® Five piece M-Style ® safety coupler & plug kit is designed ...

1/4" FNPT D style coupler has a 1/4" basic flow size and is steel plated to resist rust. Has a maximum inlet pressure of 300 PSI and air flow of 34...

PUT COLOR TO USE IN YOUR SHOP: Easily match couplers to the right plugs using color, red to red, no more guessing. Use color to distinguish between...

Two pack of 1/8" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock w...

3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" ASME safety valves are manufactured to ASME standards and certified by the national board of boiler and pressure vessel inspectors. Valves are...

1/2" FNPT automatic condensate drain removes water from the air line providing clean, dry air. Equipped with a top threaded port, this condensate d...

This 7/16" - 27 UNS single head air chuck will replace old or worn chuck heads on Milton inflator gages. This is a replacement component for a pres...

This OSHA compliant Blo Gun tip limits pressure to 30 PSI when dead ended. The brass tip will replace old or worn tips on Milton® Blo Gun #131.

These 2" high pressure tubeless tire valves offer a maximum air pressure of 80 PSI cold inflation pressure. The TR 602 tubeless tire valves fit a r...

This 1/4" FNPT Kwik Grip safety air chuck locks onto large bore tire valves for convenient hands free inflation. Use for servicing large bore valve...

Milton® 1 3/8" Patch Tube Type Tire Valve (Box of 5) 1 3/8" patch tube tire valves can be applied in either hot or cold weather. These fit rim hole...

Every driveway signal hose needs an end plug in order for the bell to ring when a vehicle drives over it. Replace old or worn driveway signal end p...

Three in one 1/2" FNPT inlet air manifold has three 1/4" FNPT outlets to supply three air tools from a single inlet at once. No need to disconnect ...

3/4" MNPT tank check valves are used to keep air volume and pressure from escaping back into compressor heads while not operating. The 1/8" FNPT si...