Milton-Industries

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

1/4" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

3/8" MNPT nylon push to connect tube fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools req...

3/8" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

1/4" MNPT breather vent offers vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs. Prevents dirt and particles from ente...

1/4" FNPT x 1/8" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

Milton ® (S-614-4) 1/4" NPT Brass Compressor Tank Drain Cock This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on compr...

1/4" NPT Reusable hose end fittings can be used again and again. Has a 5/8" Hose OD and 1/4" Hose ID. Can be used with both 1/4" inner diameter (5/...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

1/4" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

1/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

1/8" MNPT push to connect tube fittings offer easy installation of air lines. Simply push 1/4" OD tubing into fitting, no gluing or special tools r...

These 3/8" MNPT x 1/2" MNPT brass hex nipples are used to assemble new hoses or replace old fittings on hoses.

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

Milton® 1/2" ID Hose Mender Fitting (Box of 5) These 1/2" hose ID brass hose menders are used to assemble new hoses or replace old fittings on hose...

1/4" FNPT solid brass hose end fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished...

3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose...

1/4" Male hose end with 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be...

1/4" MNPT push to connect swivel branch tee fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special to...

3/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...