Skip to content
Warranty Contact
15
15
Save:
15
15

15" Hose Whip w/ Dual Head Chuck, Replacement

Milton Industries Inc.®

Part #: 509
UPC Code: 30937300980
Number of Items: 1
  • Replacement part
  • Used to replace hose whip on Milton® inflator gauge #506
  • Dual Head Chuck 1/8" -27 threads NPT
  • Hose Whip 3/8" - 24 threads NPS
  • 10 to 160 pounds per square inch
$27.31
Save:

Quantity

Processing & Handling Time: All products are shipped from the USA. Orders are processed within 24-48 business hours before shipping. Business hours exclude weekends and holidays.

15" Hose Whip w/ Dual Head Chuck, Replacement

This 15 inch heavy duty hose whip can be used to replace the old hose on the original dual head inflator gauge #506.

INSTRUCTIONS FOR USE:

If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.

Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.

Type of Hose :
Type of fiiting :
Thread Size :
SCFM :
PSI range :

This 15 inch heavy duty hose whip can be used to replace the old hose on the original dual head inflator gauge #506.

INSTRUCTIONS FOR USE:

If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.

Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.

Gauge Type Replacment Hose Whip
Height 0.62
Hose Length 15 in. Hose
Length 22
Number of Items 1
Short Description

Dual Head 15" Length Hose Whip | Replacement Hose Whip for #506 Original Milton® Tire Inflator Gauge
UPC 30937300980
Usage Used on #506
Width 1.12

WARNING

CANCER AND REPRODUCTIVE HARM

www.P65Warnings.ca.gov