SEMA2023

This kit easily removes damaged nuts, studs, pipe nipples, and bolts. Comes mounted on a 1/2″ rail, individually packaged. Includes Components: ...

The Dual Sided Twist Socket Remover is for the removal of DAMAGED/ROUNDED 17mm lug nuts and OEM and after market LOCKING LUG NUTS. Works with a b...

The LT4155 is a 20 piece factory reproduced master wheel lock key set for the removal of all 2nd generation 2009-present VW factory wheel lug nut ...

The LT4165 is a 20 piece factory reproduced master wheel lock key set for the removal of all 2nd generation 2011-present BMW factory wheel lug nut...

The LT4170 is a 20 piece factory duplicate master wheel lock key set for the the removal of 2006-present Porsche factory wheel lug nut locks. Iden...

This 1/4" NPT Blo Gun inflator pin is made for ball inflation. This accessory makes a great addition to Milton® Blo Gun #148.

This OSHA compliant Blo Gun tip limits pressure to 30 PSI when dead ended. The brass tip will replace old or worn tips on Milton® Blo Gun #131.

Brass Blo Gun replacement tip offers a maximum of 150 PSI and is OSHA compliant, as it will limit pressure to 30 PSI when dead ended. This tip will...

Digital read tire pressure gage provides accurate readings and repeatability. Measures pressure from 2 to 99.5 PSI . Requires one CR 2032 3V battery.

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

1/4" MNPT reusable hose end fittings can be used again and again. Has a Maximum air pressure of 250 PSI. Fits hoses with a 3/4" Hose OD or 3/8" hos...

1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not a...

Pack of two brass hose menders for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clam...

1/4" MNPT x 1/8" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Milton® 1 1/4" Tubeless Tire Valve Two pack of 1 1/4" Standard snap in type rubber tubeless tire replacement valve with a cap thread size of .305...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

Air and water adapter connects 3/4" garden hose to tire valves to fill tires with liquid. Complete with 2 bushings, one standard bore and one large...

Road grader and tractor valve replacements for Tr# 218-A have a base prepared for electric or chemical application to tubes. Base measures at 4 1/4...

1/4" MNPT swivel hose end requires no clamps or ferrules, just push the fitting on. Must be used with Milton® push on & lock on 3/8" ID hoses o...

Upgrade your inflation tools with the 12 Inch Extended-Reach 1/4" FNPT Dual-Head Air Chuck. Crafted to exacting standards, this air chuck ensures ...

11/32" drive fit straight grease fittings for 1/4" drill holes.

1/4" NPT push on and lock on brass hose menders are specifically designed to fit Milton® push on and lock on hoses with a 1/4" ID.

This polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Polyure...