SEMA2023

Designed specifically for Milton ® push on and lock on hoses, these 1/4" MNPT brass hose ends fit a 3/8" hose ID. These hose ends require no clamps...

This 3/8" ID MNPT swivel hose end is a replacement part for Milton ® nylon ReKoil hoses.

This 50 foot nylon re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

This 25 foot nylon re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking. Nylon ...

This 30 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 3/8" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 20 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 30 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

This 100 foot nylon re-koil hose is perfect for connecting to overhead air lines to keep the hose off the floor and resists abrasion. Maximum worki...

This 10 foot polyurethane re-koil hose is assembled with re-usable, full flow 1/4" MNPT swivel fittings on both ends to avoid twisting and kinking....

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 23/32" OD and a 0.718 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 5/8" OD and a 0.625 ID. Note that rubber hose tolerances vary ...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 19/32" OD and a 0.593 ID. Note that rubber hose tolerances var...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 1/2" OD and a 0.525 ID. Note that rubber hose tolerances vary ...

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 9/16" OD and a 0.562 ID. Note that rubber hose tolerances vary...

3/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

1/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

Milton® 1/2" MNPT 3/8" OD Push-to-Connect Swivel Elbow (Single Retail Pack) These 1/2" MNPT nylon push to connect elbow fittings offer easy install...

1/4" MNPT Nylon push to connect fittings offer easy installation of air lines; simply push tubing into fitting. No gluing or special tools required...

1/8" MNPT nylon push to connect straight tube fittings offer easy installation of air lines. Simply push tube into fitting, no gluing or special to...

3/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

Nylon push to connect tube fittings offer easy installation of air lines; simply push tubing into fitting. No gluing or special tools needed for th...