Sema2024

3/8" MNPT push to connect swivel run tee fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools...

Milton® AA style plugs are made of case hardened steel and are plated to resist rust. Featuring a push type sleeve, this 3/8" MNPT AA style plug h...

These 1/4" MNPT hose ends with 3/8" ID replacement fittings

3/8" MNPT G style couplers are used in applications that require over 60 SCFM. There are two Milton® G style couplers, but both will function the ...

3/8" MNPT G style plugs are made of case hardened steel and are plated to resist rust. G style plugs offer a basic flow size of 1/2" and a maximum...

3/8" MNPT H style plugs are made of case hardened steel and plated to resist rust. H style plugs have a basic air flow size of 3/8" and a Maximum ...

3/8" x 3/8" MNPT hex nipple. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

High Flow Steel Quick-Connect Air Coupler – 3/8" NPT Milton’s industrial (M-style) quick-connect couplers are made of heavy-duty steel which is ide...

3/8" MNPT straight through plugs are made of case hardened steel and are plated to resist rust. Designed for use with high pressure washers and ind...

Milton® (#767) 3/8" MNPT HIGHFLOWPRO® V-Style Male Coupler The HIGHFLOWPRO® 3/8" male NPT V-Style couplers have a push-type sleeve release. Simply ...

3/8" MNPT M-Style® couplers offer a 1/4" basic flow size and a maximum pressure of 300 PSI. The industry standard M-Style® couplers come with a Bu...

3/8" MNPT P style coupler bodies have 8 locking balls and a Buna-N Seal for better retention of plugs. P style couplers have a 3/8" basic flow size...

3/8" MNPT reusable hose end fittings can be used again and again. Has a maximum air pressure of 250 PSI. Fits hoses with 3/4" hose OD or 3/8" hose ID.

Two foot snubber hose with 3/8" MNPT full swivel ends is designed to absorb shock to air couplers from impact tools and air hammers. Fits a 1/2" ID...

3/8" MNPT T style couplers offer a maximum inlet pressure of 300 PSI and are ideal for industrial application. These brass couplers have air flow o...

These 3/8" MNPT x 1/2" MNPT brass hex nipples are used to assemble new hoses or replace old fittings on hoses.

Load genies are a combination of an un-loader and a check valve. Unloads discharge manifold in either vertical or horizontal position of any compre...

3/8" MNPT x 1/4" FNPT Commercial Reducer Bushing

3/8" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

3/8" MNPT drain cock is a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is ...

3/8" MNPT breather vent offers vacuum relief or pressure equalization on gear boxes, oil tanks or reservoirs. Prevents dirt and particles from ente...

3/8" NPT deluxe FRL trio is a filter, regulator and lubricator all in one. The filter has an automatic overnight drain, the regulator is the reliev...