3/8" OD straight union tube fittings offer easy installation of air lines; simply push tubing into fitting. No gluing or special tools required. Re...

1/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

3/8" MNPT nylon push to connect tube fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools req...

30" Swivel end snubber hoses with a 3/8" ID and 1/4" NPT Swivel. Use snubber hoses to absorb shock to air couplers from percussion type tools. Snub...

1/4" MNPT zamak alloy hose ends fit a 1/4" ID hose. Zamak hose ends and menders may be used in place of brass or stainless steel. Hose end include...

1/4" FNPT brass tees may be used to split lines or add additional outlets. Brass tees provide three connections with one part, making them great fo...

3/8" FNPT brass tees may be used to split lines or add additional outlets. Provides three connections with one part which is great for shops that r...

Milton® 1/2" FNPT x 3/8" MNPT Hose Fitting Adapter (Pack of 10) 3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old ...

3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

Two pack of 1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used ...

1/4" NPT Reusable hose end fittings can be used again and again. Has a 5/8" Hose OD and 1/4" Hose ID. Can be used with both 1/4" inner diameter (5/...

1/4" MNPT reusable hose end fittings can be used again and again. Can be used with 9/16" or 19/32" hose OD as well as 1/4" or 5/16" hose ID. Has a ...

Milton ® (S-614-4) 1/4" NPT Brass Compressor Tank Drain Cock This 1/4" NPT drain cock is a replacement part for old or damaged drain cocks on compr...

1/4" MNPT hose end with 1/4" ID hose offers a full swivel. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but...

1/8" MNPT nylon push to connect elbow fittings offer easy installation of air lines. Simply push tubing into fitting, no gluing or special tools re...

1/8" MNPT nylon push to connect straight tube fittings offer easy installation of air lines. Simply push tube into fitting, no gluing or special to...

1/8" MNPT push to connect tube fittings offer easy installation of air lines. Simply push 1/4" OD tubing into fitting, no gluing or special tools r...

1/4" MNPT swivel hose end requires no clamps or ferrules, just push the fitting on. Must be used with Milton ® push on & lock on 3/8" ID hoses ...

3/8" FNPT x 1/4" MNPT brass adapters are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required. Brass...

3/4" MNPT x 1/4" FNPT brass reducer bushings are used to assemble new hoses or replace old fittings on hoses when reduction in pipe size is required.

Male brass hex nipples have a 1/4" MNPT on one side, 3/8" MNPT on the other. These brass hose fittings are used to assemble new hoses or replace ol...

3/8" x 1/4" FNPT hex coupling brass hose fittings are used to assemble new hoses or replace old fittings on hoses.

1/4" NPT drain cocks are a replacement part for damaged drain cocks on compressor tanks. Turn handle to drain water, close drain cock when water is...