Skip to content
1/4
1/4
Save: 42%
1/4
1/4

1/4" MNPT 1/4" OD Push to Connect Tube Fitting

Milton Industries Inc.®

Part #: S-2200-3
  • Temperature range at installation of 32 degrees Fahrenheit to 140 degrees Fahrenheit
  • 1/4" outside diameter
  • 1/4" male national pipe thread
  • Maximum working pressure of 150 pounds per square inch
  • Reusable
  • Lightweight design
  • Buna-N seal
  • Temperature range at installation of 32 degrees Fahrenheit to 140 degrees Fahrenheit
  • 1/4" outside diameter
  • 1/4" male national pipe thread
  • Maximum working pressure of 150 pounds per square inch
  • Reusable
  • Lightweight design
  • Buna-N seal
  • Temperature range at installation of 32 degrees Fahrenheit to 140 degrees Fahrenheit
  • 1/4" outside diameter
  • 1/4" male national pipe thread
  • Maximum working pressure of 150 pounds per square inch
  • Reusable
  • Lightweight design
  • Buna-N seal
  • Temperature range at installation of 32 degrees Fahrenheit to 140 degrees Fahrenheit
  • 1/4" outside diameter
  • 1/4" male national pipe thread
  • Maximum working pressure of 150 pounds per square inch
  • Reusable
  • Lightweight design
  • Buna-N seal
$8.00
$13.90
Save: 42%

Quantity

1/4" MNPT 1/4" OD Push to Connect Tube Fitting

Nylon push to connect tube fittings offer easy installation of air lines; simply push tubing into fitting. No gluing or special tools needed for this 1/4" OD x 1/4" MNPT connector. These push to connect fittings are even reusable by simply pushing sleeve in and releasing the tubing. Milton® push to connect tube fittings are designed for use with nylon, polyurethane or low and high density polyethylene tubing. Great for garage or shop, these fittings allow for maximum air flow and faster connection than standard compression fittings. Maximum working pressure of 150 PSI.
Nylon push to connect tube fittings offer easy installation of air lines; simply push tubing into fitting. No gluing or special tools needed for this 1/4" OD x 1/4" MNPT connector. These push to connect fittings are even reusable by simply pushing sleeve in and releasing the tubing. Milton® push to connect tube fittings are designed for use with nylon, polyurethane or low and high density polyethylene tubing. Great for garage or shop, these fittings allow for maximum air flow and faster connection than standard compression fittings. Maximum working pressure of 150 PSI.

Type of Hose :
Type of fiiting :
Thread Size :
SCFM :
PSI range :

FREE SHIPPING

When you spend $75+

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today

FIND A DISTRIBUTOR

Locate the closest inventory