Skip to content
Warranty Contact
1/4
1/4
1/4
Save:
1/4
1/4
1/4

1/4" MNPT 3/8" ID Swivel Hose End Fitting

Milton Industries Inc.®

Part #: 611-6
  • The 360 degree full swivel prevents hose from kinking
  • Brass hose fittings are used to assemble new hoses or replace old fittings on hoses
  • For best results and professional finished product the hose end should be secured with a crimped ferrule
  • 3/8" Inside hose diameter
  • A hose clamp may also be used but is not as desirable.
  • The 360 degree full swivel prevents hose from kinking
  • Brass hose fittings are used to assemble new hoses or replace old fittings on hoses
  • For best results and professional finished product the hose end should be secured with a crimped ferrule
  • 3/8" Inside hose diameter
  • A hose clamp may also be used but is not as desirable.
  • The 360 degree full swivel prevents hose from kinking
  • Brass hose fittings are used to assemble new hoses or replace old fittings on hoses
  • For best results and professional finished product the hose end should be secured with a crimped ferrule
  • 3/8" Inside hose diameter
  • A hose clamp may also be used but is not as desirable.
$19.94
Save:

Quantity

1/4" MNPT 3/8" ID Swivel Hose End Fitting

Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished product the hose end should be secured with a crimped ferrule.
Type of Hose :
Type of fiiting :
Thread Size :
SCFM :
PSI range :
Full swivel 1/4" Male Hose End with 3/8" ID Hose. The 360 degree full swivel prevents hose from kinking. A hose clamp may also be used but is not as desirable. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. For best results and professional finished product the hose end should be secured with a crimped ferrule.