Skip to content
Pro Series Pistol Grip Pressure Inflator Gauge Replacement Piston Kit
Save:
Pro Series Pistol Grip Pressure Inflator Gauge Replacement Piston Kit

Pro Series Pistol Grip Pressure Inflator Gauge Replacement Piston Kit

Milton Industries Inc.®

Part #: P576-1
  • For use with 570 Series digital or analog pistol grip pressure inflator gauge | Fits 572, 573, 574, 575, 576, 577, and 578
  • Kit includes replacement piston with o-rings, deflator valve, c-clip, and spanner wrench
$13.47
Save:

Quantity

Pro Series Pistol Grip Pressure Inflator Gauge Replacement Piston Kit

Replacement part for the Milton® Pro Series Pistol Grip Inflator Gauges, when the piston or deflation button becomes worn or old.

 

Cartridge Replacement Instructions:

A. Wrench

B. Trigger pin

C. Trigger pin C-clip

D. Deflator button assembly

E. Inflator piston with 2 O-rings

F. Spring

 

  1. Use wrench (A) to remove the old deflator button (D) from gauge
  2. Pull on spring (F) to remove old inflator piston (E).
    If old piston doesn’t slide out, it may be necessary to remove the trigger to push it out from the other side. Remove the C-clip (C) and remove the trigger pin (B).
    Note: a replacement trigger pin and C-clip are included in case the old pin and clip get lost or damaged during this step
  3. Install new piston (E) and reassemble gauge following the reverse order of the above steps.
    Note: a replacement deflator button (D) is included in case the sealing surfaces and rings of the old button become damaged.

    Replacement part for the Milton® Pro Series Pistol Grip Inflator Gauges, when the piston or deflation button becomes worn or old.

     

    Cartridge Replacement Instructions:

    A. Wrench

    B. Trigger pin

    C. Trigger pin C-clip

    D. Deflator button assembly

    E. Inflator piston with 2 O-rings

    F. Spring

     

    1. Use wrench (A) to remove the old deflator button (D) from gauge
    2. Pull on spring (F) to remove old inflator piston (E).
      If old piston doesn’t slide out, it may be necessary to remove the trigger to push it out from the other side. Remove the C-clip (C) and remove the trigger pin (B).
      Note: a replacement trigger pin and C-clip are included in case the old pin and clip get lost or damaged during this step
    3. Install new piston (E) and reassemble gauge following the reverse order of the above steps.
      Note: a replacement deflator button (D) is included in case the sealing surfaces and rings of the old button become damaged.

      Type of Hose :
      Type of fiiting :
      Thread Size :
      SCFM :
      PSI range :

      FREE SHIPPING

      When you spend $75+

      WARRANTY INFO

      Offering a range of policies

      NEED HELP

      Contact our support team today

      FIND A DISTRIBUTOR

      Locate the closest inventory